shirakmetalStructural steel fabrication and welding works
Gyumri · Shirak Province · Armenia

Steel structures and welding works, made to drawings

Shirak Metal Construction LLC fabricates load-bearing steel structures for buildings and carries out locksmith and welding works in the workshop and on site.

2017Year of registration
GyumriWorkshop location
2 areasStructures and welding
Steel frame of a building under construction with a crane
Services

Six main types of work

The company works in two related areas: fabrication of building steel structures and general locksmith and welding works.

01

Building frames

Columns, beams and roof trusses for warehouses, workshops and agricultural buildings.

02

Canopies and sheds

Covered areas, parking canopies and light structures over entrances and yards.

03

Stairs and platforms

Steel stairs, landings, service platforms and railings for indoor and outdoor use.

04

Gates and fences

Metal gates, fences, grilles and doors made to the required dimensions.

05

Embedded parts

Plates, anchors and connection parts used together with concrete works.

06

Repair and reinforcement

Restoration and strengthening of existing metal structures and units.

Steel structures

The frame is made in the workshop and assembled on site

Steel structures form the load-bearing frame of many buildings. Parts are cut, drilled and welded in advance according to drawings, then delivered and connected on site with bolts or welding. This makes construction more predictable and reduces work at the building site.

  • Profiles and connections are defined in working drawings
  • Units are checked for dimensions before delivery
  • Primer and paint protect the steel from corrosion
Stack of steel profiles in a workshop
Welder working on a steel joint
Locksmith and welding works

From single parts to finished units

Locksmith works cover cutting, drilling, bending and fitting of metal parts. Welding joins them into finished units. The welding method is chosen by the type of metal, its thickness and where the work is done: semi-automatic welding is common in the workshop, manual arc welding is often used on site.

  • Workshop fabrication of frames, brackets and parts
  • On-site assembly and welding where required
  • Repair of gates, fences and metal structures
Process

How an order is usually organised

Each order goes through the same basic stages, from the first request to the handover of finished work.

Request

The customer describes the task and provides dimensions, drawings or photos of the site.

Drawings and agreement

Working drawings are prepared or checked; scope, terms and materials are agreed in writing.

Fabrication

Metal is cut, drilled and welded in the workshop and checked against the drawings.

Surface protection

Parts are cleaned and covered with primer and paint against corrosion.

Delivery and assembly

Units are transported to the site and connected with bolts or welding.

Handover

The completed work is inspected together with the customer.

Materials

Standard rolled steel products

Most building structures are made of carbon structural steel. A well-made and properly painted structure needs little maintenance; periodic inspection of coating and bolted connections is usually enough.

Beams and channelsI-beams and channels for frames and floors
AnglesTrusses, bracing and light structures
TubesSquare, rectangular and round profiles
Sheet metalPlates, connection parts and cladding
FAQ

Common questions

What is needed to start an order?

Usually the dimensions of the object, a sketch or drawings, and photos of the site. If there are no drawings, they are prepared as part of the work.

Are structures made only to drawings?

Yes. Load-bearing structures are made according to working drawings, which define profiles, connections and coating.

Is work done on site as well as in the workshop?

Most parts are made in the workshop in Gyumri. Assembly, welding and repair can be carried out on site.

How is steel protected from corrosion?

Parts are cleaned and covered with primer and paint. The coating type is agreed depending on where the structure will be used.

Contacts

Company details

Phone+374 312 5-62-40 Email[email protected]
Address94 Gorganyan St., Gyumri, Shirak Province, Armenia
Company nameShirak Metal Construction LLC
ООО «ШИРАК МЕТАЛЛ КОНСТРУКШН»
Address94 Gorganyan St., Gyumri, Shirak Province, Armenia
Շիրակի մարզ, ք. Գյումրի, Գորգանյան փող. 94
Taxpayer ID (TIN / ՀՎՀՀ)05538107
Date of registration07.06.2017
Phone+374 312 5-62-40
Email[email protected]
Websiteshirakmetal.digital